γ- Hexachlorocyclohexane detection

BAIJIAN - a professional third-party testing and inspection platform that provides professional testing γ- We provide authoritative CMA/CNAS testing r

This standard specifies the method for determining the residues of 16 organochlorine and pyrethroid pesticides in grains and vegetables (see Table 1 for 16 pesticides); Method for determining 40 organic ammonia and pyrethroid pesticide residues in fruits and vegetables (see Table A.1 for 40 pesticides); Method for the determination of 40 organochlorine pesticides and pyrethroid pesticide residues in concentrated fruit juice (see Appendix B for 40 pesticides). This standard is applicable to the determination of 16 organochlorine and pyrethroid pesticide residues in grains and vegetables; Determination of 40 organochlorine and pyrethroid pesticide residues in broccoli, chrysanthemum, scallions, celery, tomatoes, cucumbers, spinach, citrus, apples, and strawberries; Determination of 40 organochlorine pesticides and pyrethroid pesticide residues in concentrated fruit juice. The detection limits of 16 organochlorine and pyrethroid pesticide residues in grains and vegetables are shown in Table 2; The quantitative limits of the determination methods for 40 organochlorine and pyrethroid pesticide residues in fruits and vegetables are shown in Table C.1; The detection limit and quantification limit of 40 organochlorine pesticide residues of pyrethroids in concentrated fruit juice are shown in Table B.2

2 Determination of 16 organochlorine and pyrethroid pesticide residues in grains and vegetables

2.1 Principle: The organochlorine and pyrethroid pesticides in the sample were extracted with organic solvents. The interfering substances were removed through liquid-liquid distribution and chromatography purification, and detected with an electron capture detector. Qualitative analysis was performed based on the retention time of the chromatographic peak.

, External standard method for quantification. 2.2 Reagents and materials. Unless otherwise specified, only reagents and distilled water or water of equivalent purity determined to be analytically pure shall be used in the analysis. 2.2.1 Petroleum ether: Boiling range 60 C~90 C. Re steam. 2.2.2 Benzene: heavy steaming. 2.2.3 Acetone: re evaporate. 2.2.4 Ethyl acetate: steam again. 2.2.5 Anhydrous sodium sulfate. 2.2.6 Flori silica: for chromatography, burn at 620 ° C for 4 hours before use. Bake at 140 ° C for 2 hours before use. Inactivate with 5% water while hot

Function of testing report:

1. Project bidding: Issue authoritative third-party CMA/CNAS qualification report

2. Online e-commerce platform entry: Quality inspection report recognized by major e-commerce platforms

3. Used as a sales report: issuing legally effective testing reports to make consumers more confident

4. Papers and research: Provide professional personalized testing needs

5. Judicial services: providing scientific, fair, and accurate testing data

6. Industrial problem diagnosis: Verify the troubleshooting and correction of industrial production problems

BAIJIAN testing process:

1. Telephone communication and confirmation of requirements

2. Recommend solutions and confirm quotations

3. Mail samples and arrange testing

4. Progress tracking and result feedback

5. Provide reports and after-sales service

6. If urgent or priority processing is required

Our Competitive Edge:

1. The testing industry is fully covered, meeting different testing needs

2. Fully cover the laboratory and allocate localized testing nearby

3. Engineers provide one-on-one services to make testing more accurate

4. Free initial testing, with no testing fees charged

5. Self service order delivery for free on-site sampling

6. Short cycle, low cost, and attentive service

7. Possess authoritative qualifications such as CMA, CNAS, CAL, etc

8. The testing report is authoritative and effective, and is generally used in China